carpet cleaner machine - Charis One

compare with other products
brand : Santoemma category : Carpet Cleaner Machine code : Charis One

Charis-One is a carpet cleaner machine for cleaning middle sized area. With the cleaning width of 400 mm, it is suitable for cleaning companies, conference halls, shops, airports and places of worship. The machine sprays water to remove dirt from the base of carpet fiber. The water flow can be regulated for a deep or low-moisture cleaning. Also, the water spraying can be continuous or activated by the machine handle. Charis-One has a solution tank with the capacity of 45 liters. It is easy to reach the hole for filling the tank with clean water. Carpet brushing is performed by a cylindrical rotating brush. It is possible to adjust the height of the brushes according to the type of carpet and to the dirt degree. User can easily replace the brush with no need of turning the machine over. By using a 3 stages vacuum motor with high waterlift, the dirt is removed excellent and therefore drying the surfaces occurs in a very short time. A recovery tank is also used for collecting vacuumed dirt. For easily emptying the recovery tank, the drain pipe is used. Both of recovery and solution tank are detachable and made from high density polyethylene. Charis-One machine work without disturbing other people because of very low level sound. Then it can be used during the normal daily working time and in sound-sensitive places such as office and hotels. By adding the pre-spray hose and gun, the operator can pre-spray the carpet with a chemical solution before cleaning. All the controls are at the suitable places for the user comfort. Charis-One carpet cleaner machine is manufactured with modular design that makes the maintenance.

technical specifications

general specifications

productivity (m2/h) 250
power cable length (m) 15
Cleaning width (carpet/hard floor)(mm) 400

tank specifications

recovery tank capacity (L) 35
solution tank capacity (L) 35
tank material high density polyethylene

brush specifications

number of brushes 1
brush speed (rpm) 600
brush width (mm) 363
power of brush motor (W) 120

suction unit specifications

type of vacuum motor centrifugal - 3 stages
Power of vacuum motor (W) 1500
waterlift max (mh2o) 3400
air flow max (m3/h) 162

motor and power supply specifications

voltage - frequency (V - Hz) 230-60

physical specifications

weight (kg) 55
dimensions (L×W×H) (mm) 420×1040×960

by-pass pump specifications

types of pump membrane
power of pump (W) 80
Maximum pressure(bar) 9
Maximum water-flow ( l/min) 4.5

تماس با کارشناسان فروش

۰۲۱-۸۷۱۸۴